BC 650 GS Compressed Gas Cabinet

you are here

Thursday, May 17, 2012

BC 650 GS

Safety cabinet for storage of 2 gas cylinders of 50 litres each in compliance with
EN14470-2. “Test fire MPA DRESIDEN” and “GS certification”

• Predisposed for aspiration and / or filtration system(TD005).
• CUNCTATOR® electronic device for charcoal filtration system

;

Dimensions (w x d x h) and weight

External: 700 x 600 x 2015 mm
Internal: 470 x 500 x 1850 mm
Total Depth: 680 mm
Weight: 300 kg
Internal Volume: Approx 520 litres

Packaging Dimensions (w x d x h)

Overall: 740 x 800 x 2150 mm
Weight: 315 kg

Full TUV certification.
Monolithic construction.
New internal fireproof insulation made up of porous insulating matter with high fire resistance completely ecological.

Completely produced in pickled and electrogalvanized steel 10/10 mm painted with epoxide acid-proof powder coating electrostatically applied through thermic tunnel at 200°C. Thickness of painting from a minimum of 60μm (micron) to a maximum of 250 μm (micron), as per UNI EN ISO 9001:2000 procedure.
Completely sealed monolithic construction.
New building method with double cases, completely isolated by a special fire insulation.
New internal fireproof insulation made up of porous insulating material with high fire resistance completely ecological.
Internal body panel made of anti-scratch material, resistant to corrosive products.
Trimming inflatable (DIN 4102) that swells in case of fire, isolating the inside of the cabinet from the outside.
Extra trimming inflatable with protection against ‘Cold and Hot fumes’ and dusts.

Ventilation system equipped with 2 certified safety valves for air-recycle that automatically close at 70 ± 10° C. The valves are positioned on the top and on the bottom of the cabinet in order to grant the release of substances.
External connection collar Ø100 mm.
Anti-spark hinges
Security handle with lock and key, with gas installation systems.
“No smoking” and “Fire” warning stickers on the doors (European Norms DIN 4844 and ISO 3864).
Earthing system for each unit.
Fitted with adjustable legs.
Predisposed for gas installation systems.
Space for reducers and distribution control unit.
Retention belt made of fire - resistant material to hold the gas cylinders.
Metal ramp to facilitate the placement of the gas cylinder in the cabinet.